Reno Wall Putty is developed for the use on cement plaster for smoothing the surface.
Scrape all loose adhering paint film and apply one coat of primer followed by two coats of putty.
Reno putty is ready for use however small quantity addition of water may be added in case the plaster is more absorbent.
|Composition:||Water diluteable Emulsion with special pigments & extender|
|Covering:||Approx 6-7 Sq meter Per Coat depending on surface|
|No of coats:||2 Coats are required for better result.|
|Thinner:||Ready to use. Water is used for cleaning utensils.|
|Dry time:||Allow 3-4 hours for drying before sanding & recoat.|
|Flash point:||Not Applicable|
|Packing:||5 & 20 Kg.|
Note: The above Information is given in good faith, but without any Warranty.